Wall Mount Kit Details and Instructions

What is the difference between the Standard Wall Mount kit and the Damage-free Wall Mount kit?

Our Standard Wall Mount kit comes with a heavy-duty nail of proper strength to insert into your wall. Once the nail is in the wall, you can then rest the hook, which is attached to the back top of the board, on the nail. 

Our Damage-free Wall Mount kit comes with a heavy-duty adhesive strip of proper strength, and metal plate with a nail welded to it. Ultimately, one will adhere the adhesive strip to the back of the plate, and then to the wall. After doing so, one can then set the hook (located on the back top of the board) on the hardware (once the adhesive strip has adhered for 3-5 minutes). More elaborate instructions on how to use this kit are below; Please read to ensure proper installation! 

Here are pictures and instructions detailing how to install the adhesive, damage-free wall mount kit.

1) Peel both sides of the adhesive strip in the kit, and adhere it to the back of the metal hanging piece (the back is the side without the nail sticking out).

2) Stick the strip (now attached to the metal piece) to the wall, and push firmly to ensure it’s fully adhered to the wall. Allow it to adhere for 3-5 mins before hanging the skateboard on the wall.

3) Once the adhesive has sat for 3-5 minutes, you can now hang your board on the wall! On the backside of the board, there is a hook screwed into the board. Set the board with the hook on it, on to the nail part of the metal hook.

4) Now your board should be on the wall! Let me know if you have any questions by sending an email to the email listed on the contact page.